Table of Contents
Advertisement
..
DURKOPP
ADLER
使 用 说 明 书
Operating Instructions
1 .缝纫机的安装
Installation
( 1) .油 盘的安装
Installing the oil pan
( 2) .铰链的安装
Installing the
1) 油盘应搁在工作台凹槽四角。
2) 如图所示,先将两只油盘支座小①与两只油盘支
座大②分别置于油盘的四角，然后将油盘③与油盘
支座按如图所示方向放置于台板上.
1) The oil pan should rest on the four corners of the machine
table groove.
2)Fix two rubber seats ① and two rubber seats ②on the four
corners of the oil pan.The oil pan should rest on the machine
table groove.
hinge
将机头连 接钩①放入底 板孔内,与台 板的机头 连 接 钩
座②相 嵌合,再将机 头放到四只角 的机头支座 ③ 上.
Fit hinge① into the opening in the machine bed，and fit the
machine head to table rubber hinge ② before placing the
machine head on cushions ③ on the four corners.
1
Hide quick links:
Advertisement
Table of Contents
