Change Sewing Feet And Fabric Support Plate - Duerkopp Adler 530 Installation Instructions Manual

6.

Change sewing feet and fabric support plate

6 4 3 2 1
Caution: Danger of injury !
Switch off main switch.
Change sewing feet and fabric support plate only when the button
sewing automat is switched off.
Change the sewing feet
–
Unscrew the screws 3 and lift off the entire button clamp 4.
–
Unscrew the screws 5 and lift off sewing feet 6.
–
Put the new sewing feet in place and fix them with the screws 5.
The sewing feet must still be manoeuvrable.
–
Reset the button clamp 4 and fix it with with the screws 3.
Change the fabric support plate
–
Unscrew the screw 1.
–
Change the fabric support plate 2.
–
Put screw 1 back into place and fix it.
6 5
2
17