Change Sewing Feet And Fabric Support Plate - Duerkopp Adler 510 Operating Instructions Manual

6.

Change sewing feet and fabric support plate

2 1
The automatic bartacker 510 is delivered with a standard sewing
equipment.
If you have received a further optional sewing equipment, this has to
be mounted as follows:
Caution: Danger of injury !
Switch off main switch.
Change sewing equipment only when main switch is switched off.
Disassemble sewing equipment
–
Unscrew screws 3.
–
Pull off holder 5.
–
Take out sewing feet 4 and 6.
–
Unscrew screw 1.
–
Take off support plate 2.
Assemble sewing equipment
–
Insert sewing feet 4 and 6.
–
Place retainer plate 5 and screw tight with screws 3.
–
Place support plate 2 and screw tight with screw 1.
ATTENTION Risk of breakage !
When changing the clamping foot enter without fail the new clamping
foot number in the menu "Equipment".
3 6 5 4 3
2
17