Set Up The Automatic Bartacker - Duerkopp Adler 510 Operating Instructions Manual

4.2 Set up the automatic bartacker

4 3 2 1
The small parts for setting up the automatic bartacker are included in
the accessories.
–
Place the automatic bartacker 1 on the oil pan 4.
–
Fasten the automatic bartacker on the left and on the right with the
fixtures 5 and 8.
For this purpose screw the fixtures 5 and 8 tight with the screws 9,
the sheets 11 and the counternuts 10.
–
Insert the machine head support 6 in the drill-hole of the table top.
–
Tilt the automatic bartacker sideways.
–
Run the connecting cables 2 under the table top through the
opening 3.
–
Tilt the automatic bartacker back.
9
8
10
8 7
9
10
11
6 5
5
11
2