Application Messages - Duerkopp Adler 510 Operating Instructions Manual

8.6.2

Application messages

Picto- Description
gram
Capacity counter is "zero"
Handwheel turned
manually
seam pattern exceeds the
inner frame of the
clamping foot either -X or
+X direction
Contour exceeds the inner
frame of the clamping foot
in -X or +X direction and
Y-direction
Contour exceeds the inner
frame of the clamping foot
in -X and -Y direction or
+Y-direction
Contour exceeds the inner
frame of the clamping foot
in +X and -Y direction or
+Y-direction
Contour exceeds the inner
frame of the clamping foot
in X and -Y direction or
+Y-direction
Contour exceeds the inner
frame of the clamping foot
in -Y or +Y direction
Category Reaction / Troubleshooting
· Clamping foot can only be
Hint lowered after
confirmation via the "OK" key.
After the confirmation, the hint
disappears.
· With the confirmation, the capacity
counter is reset to its
initial value again.
After interruption of the sewing procedure:
Warning · Impossible to continue sewing
· Stop the sewing process by
stepping the pedal backwards,
confirmation with push button key 1
(clamps) or pressing the "ESC" key at
the control panel
· No sewing start possible
Warning · Select another clamping foot
· Choose another sewing pattern
· Reduce size of sewing pattern in
X-direction
· No sewing start possible
Warning · Select another clamping foot
· Choose another sewing pattern
· Reduce size of sewing pattern in
X-direction
· Reduce size of sewing pattern in
Y-direction
· No sewing start possible
Warning · Select another clamping foot
· Choose another sewing pattern
· Reduce size of sewing pattern in
Y-direction
· No sewing start possible.
Warning · Select another clamping foot
· Choose another sewing pattern
· Reduce size of sewing pattern in both
X- and Y-direction
· No sewing start possible.
Warning · Select another clamping foot
· Choose another sewing pattern
· Reduce size of sewing pattern
X-direction
Reduce Y-Offset in the corresponding
direction
· No sewing start possible.
Warning · Select another clamping foot
· Choose another sewing pattern
· Reduce Y-Offset in the corresponding
direction
1
79