Description Of Product - Duerkopp Adler 510 Operating Instructions Manual

1.

Description of product

The Dürkopp Adler 510 is a CNC automate for bartacking seams and
short seams. The available standard bartacks are size-adjustable and
can additionally be memorized in this modified shape.
Free seam contours can be programmed directly at the control panel
without any further devices.
Technical features
–
DAC control with control panel.
The following functions are available:
–
50 standard bartacks.
These bartacks can temporarily be modified as regards length,
width and speed. When switching off the automate the
modified values of the bartack sewn last are maintained.
–
40 modified bartacks can be memorized in addition.
–
9 free seam contours with a total of 5000 available stitches
can additionally be memorized.
So it is possible to attach e.g. small appliqués.
The coordinates are entered at the control panel. No further
devices are required.
–
25 seam pattern sequence programs with up to 20 seam
patterns per seam pattern sequence program can be created
and memorized.
–
The coordinates are entered with a precision of 0.1 mm.
–
In case of a rectangular contour of the fabric clamping feet the
modification of bartacks is automatically checked in order to
avoid a collision of needle and fabric clamping feet.
–
Counter of capacity and daily number of pieces.
–
Bartacks and/or seam pattern sequence programs and/or the
modification of special bartacks can be blocked.
–
The speed can be changed from 0 rpm (manual operation with
full operability of the x-y drive) up to 2700 rpm in
steps of 100 rpm.
–
Fabric drive via two step motors.
–
Drive of the automatic bartacker directly at the arm shaft via
brushless direct current motor.
–
Maximum sewing field size 40 x 20 mm.
–
Oil wick lubrication of arm shaft and driving shaft with two oil
reservoirs.
–
Service and maintenance work is supported by comprehensive test
programs.
1
5