Oil Lubrication - Duerkopp Adler 510 Operating Instructions Manual

10.2 Oil lubrication

Maintenance work
to be done
Lubrication of the automatic
bartacker
3
Caution: Danger of injury !
Oil can cause skin eruption.
Avoid a longer contact with the skin.
Wash yourself thoroughly after a contact.
ATTENTION !
The handling and disposal of mineral oils is subject to legal
regulations.
Deliver used oil to an authorized collecting station.
Protect your environment.
Be careful not to spill any oil.
Oil the automatic bartacker exclusively with lubricating oil DA-10 or an
equivalent oil with the following specification:
–
Viscosity at 40° C:
–
Ignition point:
DA-10 can be bought at the sales points of
DÜRKOPP-ADLER AG under the following parts numbers:
250-ml-Container:
1-Litre-Container:
2-Litre-Container:
5-Litre-Container:
Explanation
The automatic bartacker is equipped with a
central oil wick lubrication. The bearings are
provided by the oil reservoirs 2 and 3.
- The oil level must not drop below the red
marking of the two oil reservoirs.
- Fill up oil up to the red marking through
drill-hole 1.
2 1
2
10 mm /s
150° C
9047 000011
9047 000012
9047 000013
9047 000014
1
Operating
hours
8
89