Operating; Threading Needle Thread; Operating 7.1 Threading Needle Thread - Duerkopp Adler 510 Operating Instructions Manual
Cnc automat for bartacking seams and short seams
Hide thumbs
Also See for 510:
- Parts list (58 pages) ,
- Operating/service instructions manual (46 pages) ,
- Operating instructions manual (33 pages)
Table of Contents
Advertisement
7.
Operating
7.1 Threading needle thread
Caution: Danger of injury !
Switch off main switch !
Thread the needle thread only when the automatic bartacker
is switched off.
–
Put thread reels on the thread reel holder and conduct needle
thread and bobbin thread through the unwinding arm.
The unwinding arm must be positioned vertically above the thread
reels.
–
Thread the needle thread as shown on the following illustration.
1
9
Hide quick links:
Advertisement
Table of Contents
