Maintenance 10.1 Cleaning And Checking - Duerkopp Adler 510 Operating Instructions Manual

10. Maintenance
10.1 Cleaning and checking
Maintenance work
to be done
Machine head
- Remove sewing dust and thread
remainders.
(e.g. with compressed air pistol)
Control box
88
Caution: Danger of injury !
Switch off main switch.
The maintenance of the automatic bartacker must only be carried
out if the machine is switched off.
Maintenance work has to be done after the intervals indicated in the
tables at the latest (see column "Operating hours").
The processing of fluffy material may require shorter maintenance
intervals.
A clean automatic bartacker protects from disturbances.
1
Explanation
Spots to be cleaned especially carefully:
- Underside of the throat plate
- Zone around hook 1
- Bobbin case
- Thread trimmer
- Zone around needle 2
Keep free the ventilation grilles.
2
Operating
hours
8
8