Operating The Control Of Cl; The Control Panel; The Keys - Duerkopp Adler 510 Operating Instructions Manual

8.

Operating the control of cl. 510

8.1 The control panel

P-key:
Programming mode
ESC-key
8.1.1

The keys

Function key
Cursor keys
16
For the input and output of data a control panel with an LCD display
and function keys is used.
Function
If no text field is activated:
Press key "ï" to return from a submenu to the parent menu.
If a text field is activated:
Change between the points (this does not refer to the selection of
seam patterns or sequences).
In the sewing mode in case of sequence operation:
Change to the next or to the preceding seam pattern.
S-key:
Sequence-
Programming mode
F-key:
Technician mode
Cursor keys
OK-key