Step 3. Pass the lag screw through the center hole of the
crosbar mounting bracket and screw into guide hole. Tighten
until outlet box is firmly mounted to beam. This box must
be firmly secured to the ceiling. We recommend that the
ceiling fixture outlet box be of sufficient capacity enabling
it to support the weight of fan and light fixture under any
conditions.
CANOPY
HATCH
Step 4. Attach the canopy to the crossbar mounting bracket
with three of the 8-32 x 2
1
/
4
lock washers. Tighten the screw firmly by hand only.
note: On sloped ceilings, align the
canopy opening towards the top or
room peak.
LAG SCREW INSTALLATION
CANOPY HARDWARE
CANOPY
CANOPY INSTALLATION
" long canopy screws and canopy
W
ilderness
LAg
SCREw
CANOPY LOCK wASHER (4)
FEED OUTLET BOX
wIRES THROUgH
CANOPY OPENINg
™
CANOPY SCREw (4)
CANOPY
LOCK
wASHER
CANOPY
SCREw
5