Document Skew - Oki OF5900 Maintenance Manual

7.20

Document Skew

Start
Are the document guides set to meet the
document width?
Are the documents straightly loaded along
The documents have
the same width?
The thickness of the document:
< 0.08 to 0.13 mm (Multiple doc.)?
< 0.06 to 0.15 mm (Single doc.)?
The documents are
normal?
Check points:
1. Adhesive such as paste, tape, etc. on the
surface of the documents?
2. The leading edges of the documents are
rugged due to paste, etc.?
The control panel unit is closed firmly?
Are there obstacles such as pieces of
paper in the document-passing slot?
Is the document-passing slot rugged
due to flaws, etc.?
A
OKIFAX 5700/5900
the guides?
Yes
No
Yes
Yes
No
Yes (Normal)
Yes
No
No
1. Set the guides to meet the
No
2. Load the documents
Load documents by meeting
the same width.
No
Use documents of the left
specification.
Use the carrier sheet.
No
Close the control panel unit.
Yes
Remove the obstacles.
Yes
Replace the rugged parts.
7 - 24
document width.
straight along the guides.