Application; General; Note On Explanation; Related Document - Oki OF5900 Maintenance Manual

1.

General

1.1

Application

This specification applies to the OKIFAX 5700/5900, an MFP unit capable of two-way commu-
nication using the parallel port as its standard feature.
1.2 General
This specification describes the details of PC loading through the Centro connector provided in
the OKIFAX 5700/5900.
The functions covered are for loading by each of default data, flash memory program and
language areas, which are equivalent to those of the existing HSLS.
1.3

Note on Explanation

The terms used herein shall be interpreted as follows unless specified otherwise.
Term
Transfer
Receiving
Loading data
Loading program
Transfer
MFP main unit
MFP system
G4 board PC
loading data
G4 board loading
program
1.4

Related Document

FX-056/176 Product Specification
OKIFAX 5700/5900
Explanation
Transmission from the PC to the MFP
Receiving from the PC to the MFP
Data in general that is transferred from the PC to the MFP
Program for receiving the data actually loaded to the MFP
Data transfer from the MFP to the G4 board
Main unit of the MFP excluding the option board
Whole MFP system including the option board
Data transferred from the PC to the MFP, that is, a G4
board loader or a G4 board program to be loaded
Program that runs in the G4 board's DRAM to receive the
G4 board program from the MFP main unit.
G - 1