Scanner (Cis); Pc1/Pc2 Sensors - Oki OF5900 Maintenance Manual

Install the paper guide while pressing the
PC1 lever.
* This is necessary to prevent the lever
from sticking.
4.3.16

Scanner (CIS)

1. Remove the CIS assembly by discon-
necting one connector.
2. Remove the CIS from the bracket.
(* Disengage the hook on the side where
there is no connector.)
Caution: Pay attention to the orientation
when reassembling it.
Caution: Be careful not to damage the
cable when disconnecting.
(The cable is very thin.)
4.3.17

PC1/PC2 Sensors

1. Disengage four hooks and remove the
PC1 sensor.
2. Pull out the PC2 sensor.
OKIFAX 5700/5900
Connector cable
PC2 sensor
4 - 20
PC1 lever
CIS assembly
PC1 sensor
PC1 Sensor