2.10.3
Network Card Installation Instruction
1. Remove Cover-Rear, Plate-Rear and 2 piece of Plate-dummy.
2. Connect Network card with Adapter
board, then, mount it into the room.
Before installation, check #1 of Dip-
switch should be "ON" and #2 - #4
be "OFF". In case of G4 board
application, exchange above
Adapter board to G4 board.
Dip-switch
Network Card
3. Attach Plate-Rear, and fix
Network card, Adaptor board
with 2 each screw. Then fix
Plate-Rear.
4. Attach Cover-Rear.
OKIFAX 5700/5900
Plate-dummy
Plate-Rear
Adapter board
Plate-Rear
2 - 118
Cover-Rear