Table of Contents
Advertisement
Memory Switch E:0 - Scanner
Initial
Switch
Setting
7
0
Factory use only
6
0
Factory use only
5
0
Factory use only
4
0
Factory use only
3
0
Factory use only
2
1
Background level
0: Automatic
1: Fixed
1
0
Effective scan width
0: A4=208 mm (8.2 " ) / B4=252 mm (9.9 " ) / A3=298 mm (11.7 ")
1: A4=216 mm (8.5 " ) / B4=256 mm (10.1 " ) / A3=304 mm (12 " )
Note: The unit must be turned off, then on, for this change to take effect.
(Remember, any documents stored in memory will be lost if power is turned off.)
0
1
Document TX length limit
0: Unlimited
1: 1 meter
Memory Switch E:1 ∼ ∼ F:9 --- Factory use only
Memory Switch G:0 - Remote reception
Initial
Switch
Setting
7
0
Factory use only
6
1
CML relay off time after
dialing
0: 1 sec
1: 200 ms
5
0
DTMF tones heard through
handset
0: No
1: Yes
4
0
Factory use only
3
0
Factory use only
2
0
Factory use only
1
0
Remote reception from the
second phone
0: No
1: Yes
0
0
Remote reception from fax
handset
0: No
1: Yes
Adjust
The background level measures the reflective
ability of scanned documents.
Setting to unlimited will override document jam
sensing.
Adjust
When dialing from the keypad, phone line noise
may occur as the CML relay switches on and off.
Set this switch to "0" to avoid this.
Determines if DTMF tones are produced through
the handset in off-hook dialing.
Ability to perform remote reception (hook-flash
transfer) from the second phone.
Ability to perform remote reception (hook-flash
transfer) from the fax handset.
3-24
Usage/Comments
Usage/Comments
Advertisement
Table of Contents
