Saving Font Character Patterns - Brother PE-Design Next Instruction Manual

Saving Font Character Patterns

Overwriting
Click 1, then 2.
1
2
 If no file name has been specified or if the
file cannot be found, the Save As dialog
box appears.
a
Note:
If any part of the character pattern extends
off the Design Page, a message appears.
Edit the character pattern so that no part
extends off the Design Page, and then save
it again.
Saving with a new name
The font character patterns are saved as .pef files.
1.
Click 1, then 2.
1
2
Saving Font Character Patterns
2.
Select the MyFont folder at the following
location.
For example, (Drive where PE-DESIGN was
installed)\Program Files (Program Files
(x86))\Brother\PE-DESIGN NEXT\MyFont
And then type in the file name, then click Save.
a
Note:
• The font will not be usable in the Layout &
Editing if it's stored in a different folder.
• The created font is saved in the MyFont
folder at the following location.
• Saved files can be used in Layout &
Editing.
c
"Step 5 Creating an embroidery
pattern using the created font
characters" on page 251
• If Layout & Editing has already started up
when a new character is saved in Font
Creator, that character will not appear in
the Font selector list in Layout & Editing. In
this case, exit Layout & Editing, and then
start it up again.
263