Brother PE-Design Next Instruction Manual page 209

2.
Specify the desired settings in the Gradation
Pattern Setting dialog box, and then click
OK.
(3)
(2)
(1) To select a preset gradation pattern, click
the desired pattern under Select pattern.
(2) Move the sliders to adjust the density of
the gradation pattern.
(3) The preview area shows the setting
changes that you make.
b
Memo:
Gradation can be specified if satin stitches, fill
stitches or programmable fill stitches have
been selected for the region sewing and
Constant has been selected as the sewing
direction.
a
Note:
An additional color (used for blending in
Layout & Editing) cannot be specified with
the gradation setting in Design Center.
Applying effects to concentric
circle and radial stitches
In order to increase the decorative effect, you can
move the center point of regions set to the
concentric circle stitch or radial stitch.
1.
Click 1, then 2.
1
2
2.
Select the desired color and sew type
(Concentric Circle Stitch or Radial Stitch).
3.
Click the region.
 The center point (
4.
Drag the center point to the desired location.
(1)
b
Memo:
To move the center point later, click
then right click the region with the concentric
circle stitch or radial stitch applied. The center
point appears and can be moved.
Sew Setting Stage
) appears.
, and
207