Changing The Font - Brother BES-100E Workbook

NOTE: To identify a text shape, move the pointer over it so that its name appears in the left corner of the
status bar.
3
In the box, type the desired text.
Text
NOTE: If the
Simple rectangle
entered. For more information, see Entering multiple lines of text in chapter 1.
4
Select the desired settings, such as the font or needle (thread) color.
NOTE: The
Baseline
Baseline
entered text.
Simple rectangle
Double arch
Simple flat top arch
Simple flat bottom arch
5
Click the button. The text shape is added at the center of the design.
OK

Changing the font

To change the font of a text shape:
1
Using the tool (
Move
appear around the shape.
2
Do either of the following:
Click the
Text Properties
appears. In the
In the drop-down list in the
Fonts
18
or
Double circle
settings are available only with the following text shapes. With text shapes where the
settings are not available, the baseline is calculated automatically according to the
Vertical orientation
Concave single arch
Step up
Step down
), select the text shape that you wish to change. "Dancing ants" (moving dashes)
button (
drop-down list, select the desired font name, and then click the
Font
Text
Figure 23
text shape was selected, multiple lines of text can be
Convex single arch
Flat top arch
Flat bottom arch
) in the bar. The
Text Text
bar, select the desired font name.
tab of the
Text Properties
dialog box
button.
OK