Tutorial 8: Manual Punching - Brother PE-Design Next Instruction Manual

Tutorial 8: Manual Punching

The following example shows how the Manual
Punch tools are used to draw a beard over the
image of the reindeer (Rudolph.bmp), which is
used as a template.
The template and finished pattern are provided in
the following folder.
Documents (My Documents)\PE-DESIGN NEXT\
Tutorial\Tutorial_8
1
Import the file Rudolph.bmp.
c
"Importing Image Data" on page 137.
2
Click 1, then 2.
1
2
 Five buttons appear:
: This is used for creating straight block-
type punching patterns (region sewing).
(Shortcut key:
: This is used for creating curved block-
type punching patterns (region sewing).
(Shortcut key:
Z )
)
X
Tutorial 8: Manual Punching
: This is used for semi-automatically
creating straight block-type punching
patterns.
By semi-automatically tracing, points
can be specified along the lines of a
template.
(Shortcut key:
b
Memo:
If the semi-automatic block-type punch tool is
used for drawing, an image must be imported
to be used as a template.
: This is used for creating running-type
punching patterns (line sewing).
(Shortcut key:
: This is used for creating feed-type
punching patterns (jump stitches).
(Shortcut key:
c
"Jump Stitch and Jump Stitch Trimming"
on page 270.
While creating a manual punching pattern,
you can switch between the various tools. This
is very easy if the shortcut keys are used.
3
Click to start drawing a running-type
pattern.
4
Select Fill Stitch as the block sew type and
SILVER as the punch color.
5
Click in the Design Page to specify points 1
(start point) through 4.
4
3
2
1
)
C
V
)
)
B
149