Specifying The Design Page Size And Color - Brother PE-Design Next Instruction Manual

Specifying the Design Page Size and Color

The color and size of the Design Page can be changed. You can select a Design Page size according to the
size of hoop that you will be using with your embroidery machine. You can also specify a custom size for the
Design Page for embroidery patterns that will be split and embroidered in multiple sections.
1.
Click 1, then 2.
1
2
2.
Specify the settings for the Design Page, and
then click OK.
(3)
(7)
(1) Machine Type:
Select your machine type. The settings
available in the Page Size selector differ
depending on the selected machine type.
(2) Hoop Size:
Select the desired hoop size from the
selector.
(3) Rotate 90 Degrees:
Select this check box to arrange the
pattern in a Design Page rotated 90°.
(4) Custom Size:
Specify a custom size for split embroidery
patterns.
Select this option, and then type or select
the desired width and height for the
Design Page.
c
"Tutorial 10-1: Creating Split Embroidery
Designs" on page 155.
(5) Page:
Select the desired color for the Design
Page.
(6) Background:
Select the desired color for the work area.
(7) Default:
To return to the default settings, click this
button.
Specifying the Design Page Size and Color
(1)
(2)
(8)
(4)
(5)
(6)
(8) Edit User Hoop:
Click this button to display the User Hoop
Settings dialog box, where a user hoop
size can be added. The added user hoop
size appears at the bottom of the list.
c
"Specifying a user hoop size" on page 86
a
Note:
• The Design Page sizes 130 × 300 mm,
100 × 172 mm indicated by the "*", are
used to embroider multi-position designs
using a special embroidery hoop attached
to the embroidery machine at three
installation positions.
c
"Tutorial 10-2: Creating Design
for Multi-Position Hoops" on
page 161
• Do not select a hoop size larger than the
embroidery hoop that can be used with
your machine.
• When Cap Frame, Cylinder Frame or
Round Frame has been selected, the
Design Page cannot be rotated 90°.
85