Brother PE-Design Next Instruction Manual page 39

Tutorial 2: Drawing shapes to create an embroidery design
2
Specify the sewing attributes.
(A) Click Sewing Attributes tab.
If the Sewing Attributes tab is not
displayed, click View, then Sewing
Attributes.
(A)
(C)
(D)
(E)
(B)
The effects of the specified
settings can be previewed. This
preview can be displayed/hidden
by clicking the Show Hint/Hide
Hint button.
Click this button to return the
attribute to its default setting.
(B) There are two display modes for the
Sewing Attribute Setting dialog box. For
this example, we will specify settings in
Beginner mode.
(C) Drag the Density slider to specify 5.0 line/
mm.
(D) Drag the red arrow in Direction area to
90°.
(E) Click in the Programmable fill
section.
(F) Select net4, and then click OK.
(G) Move the slider to specify 7.6 x 7.6 mm.
The selected pattern is displayed.
37