Drawing Shapes
2.
Click 1, then 2, then 3.
1
2
3
b
Memo:
To see better what the hole sewing setting
does, preview the patterns before and after
setting hole sewing.
c
"Stitch View" on page 70
■
Canceling hole sewing
1.
Select a pattern that has been set for hole
sewing.
2.
Click 1, then 2, then 3.
1
2
3
Changing shapes of
overlapped patterns
Embroidery patterns created with the Rectangle,
Circle or Arc tools, Shape tools or the Line/Region
tools can be selected to remove overlapping regions
or to be merged.
■
Removing overlapping
Overlapped patterns can be set so that the
overlapping region is removed.
46
1.
While holding down the
more overlapped patterns to select them.
2.
Click 1, then 2.
1
2
• When partially overlapped
• When enclosed
First pattern in the sewing order
Second pattern in the sewing order
Third pattern in the sewing order
Ctrl
key, click two or