Brother PE-Design Next Instruction Manual page 77

Jump Stitch Trimming
The Jump Stitch Trimming function can be turned on
or off.
a
Note:
These settings are applied only when
embroidering with our multi-needle
embroidery machines. Before these settings
can be specified, select
Machine Type in the Design Setting dialog
box.
c
"Specifying the Design Page
Size and Color" on page 85
The Jump Stitch Trimming button (
available in the Sewing Order pane.
Select a frame, and then click
.
ON
under
) is
OFF
Checking Embroidery Patterns
b
Memo:
• appears if the thread trimming setting is
not the same for all patterns in a frame with
beside it.
• The thread is cut before the thread color is
changed, even if Jump Stitch Trimming
has been turned off for the frame.
• Click 1, then 2, then 3 to view the thread
trimming locations in the Design Page.
2
3
About Minimum jump stitch length for thread
trimming
• The jump stitch length can be specified on the
Output tab into the Design Settings Dialog. (To
displayed it, click Home tab in the Ribbon, then
Design Setting).
• If the jump stitch length is less than the length
specified for Minimum jump stitch length for
thread trimming, the thread will not be cut,
even if Jump Stitch Trimming has been set.
• Whether or not Minimum jump stitch length
for thread trimming is available differs
depending on the selected machine model. For
details, refer to the Operation Manual for the
machine.
1
75