Brother PE-Design Next Instruction Manual page 310

Sewing attributes
Cross stitch
Smaller
Size
Single
Times
Concentric circle stitch, radial stitch and spiral stitch
For details on moving the center point of the concentric circle stitch and the radial stitch, refer to "Moving the
center point" on page 65.
Concentric Circle Stitch Coarse
Radial Stitch Coarse
Density
Spiral Stitch Coarse
Run pitch Specify the length of one stitch.
Stippling stitch
Run pitch
Spacing
Use Motif
Pattern and size of the
motif stitch patterns
H-Arrange
V-Arrange
Offset
Spacing
Run pitch
308
Specify the length of one stitch.
This cannot be specified if the motif stitch is
used.
Narrow
The pattern is finer.
To use a motif stitch in the pattern, select the check box, and then specify settings for the
following attributes.
c
"Motif stitch" in the "Line sewing attributes" on page 297.
Larger
Triple
Concentric Circle Stitch Fine
Radial Stitch Fine
Spiral Stitch Fine
Short Long
Short Long
The turns are The turns are more
smoother. angled.
Wide
The pattern is coarser.