Brother PE-Design Next Instruction Manual page 161

Step 7 Embroidering
1
When large-size embroidery designs are
transferred to the embroidery machine, the
patterns appear on the embroidery machine
display as shown below. For this example,
select the first embroidery pattern section
(Aa).
b
Memo:
If there is no stitching in section Aa, select the
first section that contains stitching. Click the
Design Property button to check the
embroidering order.
2
Attach the embroidery hoop to the embroidery
machine, and then using the machine's layout
adjusting functions, align the needle position
with the intersection of the lines drawn on the
fabric.
3
Embroider the selected pattern.
4
Remove the embroidery hoop from the
embroidery machine, and then remove the
fabric from the hoop.
5
Hoop the fabric for the next design section.
c
"Hooping the fabric" on page 158
Tutorial 10-1: Creating Split Embroidery Designs
b
Memo:
When an embroidery design created in a
custom Design Page is saved or transferred to
an original card, alignment stitching (single
lines of running stitches with the color NOT
DEFINED, with a pitch of 7.0 mm, and starting
with fixed stitches with a pitch of 0.3 mm) is
added at the edges of the design sections.
(The alignment stitching appears in the print
preview and is printed in red.)
Sample data for this tutorial
1) Embroider the upper-left design section.

Alignment stitching is sewn below and
on the right side of the embroidered
design section.
2) Hoop the fabric for the upper-right design
section with the left side of the hoop
aligned on the alignment stitching on the
right side of the design section sewn in
step 1, and then embroider the design.

Before the design section is
embroidered, alignment stitching is
sewn on the left side. Make sure that
this alignment stitching aligns with the
alignment stitching sewn in step 1.
After the design section is
embroidered, alignment stitching is
sewn below the design section.
159