Brother PE-Design Next Instruction Manual page 137

(2) Mask shapes
The image will be masked with the
selected shape.
b
Memo:
If is selected, points can be entered,
moved and deleted to create a mask with the
desired shape.
To add points, click the outline of the mask.
To move a point, select the point, and then
drag it. To delete points, select the point, and
then press the
Delete
(3) If Auto Generate was clicked,
selected and an outline of mask was
automatically detected from the image.
The Auto Generate button is available
only with images that have a light-colored
background, like in this photo.
(4) Zoom
(5) Clicking the Image Tune button displays
an Image Tune dialog box.
key.
is
Advanced Stitch Wizard Operations
• Move the Original – Sharp slider to
adjust the sharpness of the image's
outlines. A setting more towards Sharp
makes a more noticeable boundary
between bright and dark areas.
• Move the Dark – Bright slider to adjust
the brightness of the image.
• Move the Low – High Contrast slider to
adjust the contrast of the image.
The next step differs depending on the color range
selected for the embroidery pattern.
■
Check Mask Shape/Modify Image
dialog box
If Color, Sepia or Gray was selected for Photo
Stitch 1, Photo Stitch 2 or Cross Stitch, or if Auto
Punch was selected:
The following dialog box appears.
Embroidery
pattern
size
Adjust the position and size of the image, and then
click Next to continue to the next step.
Drag the image to move it. Drag the handles to
adjust the size of the image.
• Drag the image to the desired position.
• Drag the handle to adjust the image to the
desired size.
b
Memo:
Click Fit to Page to adjust the image to the
size of the Design Page.
135