Applying And Editing Stamps; Applying A Stamp - Brother PE-Design Next Instruction Manual

Applying Sewing Attributes to Lines and Regions
a
Note:
• These commands can only be used with
patterns created using the Line/Region
tools, the Rectangle/Circle/Arc tools and
the Shapes tools. They cannot be used
with patterns created using the Text
tools or the Manual Punch tools.
• The bottom embroidery pattern must
have one of the following sew types
specified for region sewing.
• Satin stitch
• Fill stitch
• Programmable fill stitch
• In order to use the Line command, line
sewing must be switched on for the top
embroidery patterns.
In order to use the Engrave or Emboss
commands, region sewing must be
switched on for the top embroidery
patterns.
Applying and editing
stamps
You can create engraved/embossed effects by
stamping a shape into a pattern. This appears as
stitching sewn in different directions.
■

Applying a stamp

1.
Draw a shape.
60
2.
Click 1, then 2, then 3.
1
2
3
3.
Select a stamp pattern (.pas file with stamp
settings applied).
(4)
(1)
(1) Select a stamp pattern.
(2) Specify the size of the stamp pattern.
(3) Specify the direction of the stamp pattern.
(4) To select a different folder, click
b
Memo:
Engraving and embossing stamp settings
appear as red- and blue-filled areas.
4.
Click the object drawn in step 1 to select it.
 "Marching lines" appear around the
selected object.
5.
Click the desired locations within the object.
You can preview the effect of the created
stamp in Realistic View.
b
Memo:
• Stamps can be applied to regions of objects
that have the satin stitch, fill stitch and
programmable fill stitch applied.
• Using Programmable Stitch Creator, you
can edit patterns that have been provided or
you can create your own.
c
"Programmable Stitch Creator" on
page 229
(2)
(3)
.