Camera Server Registration Wizards; Registering A Camera Server; Step 1: Start Up The Register Camera Server Wizard; Step 2: Enter A Network Address For The Camera Server - Canon WebView LivescopeMV User Manual

Camera Server Registration Wizards

The first task to perform in MV Manager is to register camera servers that are to be monitored. To add a
camera server, simply follow the easy instructions in the wizard-style screens. There are two wizards: the
Register Camera Server wizard, which is used to enter the network address for the camera server; and the
Search/Register Camera Server wizard, for auto detecting camera servers connected to the network.

Registering a Camera Server

Camera servers are registered in the following 4 steps:
Step 1
Start up the
Register Camera
Server Wizard

Step 1: Start up the Register Camera Server Wizard

Step 2: Enter a network address for the camera server

1
2
22
Step 2 Step 3
Enter a name
Enter a network
and comment
address for the
for the camera
camera server
server
Step 4
Complete the
settings
Select Camera Servers on the Navigation bar, and
click Register Camera Server on the Toolbar. When
the wizard startup screen appears, click Next.
In the "Network address" field, enter an IP address
or host name for the camera server being added.
The HTTP port number set as a property (see p. 99)
of the camera server appears as a default in the
HTTP port field. Although the HTTP port number is
usually 80, if another value is preferred, enter that in
the HTTP port field and click Next.
Camera server information is retrieved at the
entered network address. Enter the Administrator ID
and Password in the window that appears, and click
OK.