Installation Procedures
Starting Up the Installer
When you load the WebView Livescope MV Ver. 2.1 installer CD-ROM into the PC, the main
panel of the installer automatically appears. If it does not appear, in Explorer, double-click
"\mv2setup.exe" on the CD-ROM.
Click the buttons to start up the installer and proceed with installation.
Install MV Manager
This button installs both MV Manager and MV Station. This setup is for administrators who manage the
camera servers and create monitoring screens.
Install MV Station
This button installs MV Station only. This setup is for operators who view monitoring screens.
c
This product consists of MV Manager and MV Station for one client. If
additional MV Station installations are required, please purchase separate MV
Note
Station licenses.
When you place the mouse
cursor on these buttons,
explanations about them appear
below the cursor.
1
15