Canon WebView LivescopeMV User Manual page 114

(5) VIEW-Windows mode: Camera server registration error [05]
Message
Cause
Action to
be taken
(6) Access restrictions at the camera server: Camera server registration error [06]
Message
Cause
Action to
be taken
(7) Other connector error: Camera registration error [07]
Message
Cause
Action to
be taken
(8) Administrator account authentication failed
Message
Cause
Action to
be taken
(9) If offline
Message
Cause
Action to
be taken
114
The camera server is not set up properly. Make sure:
• [Target Application] of [Basic Settings] is set to [WebView Livescope].
The camera server application mode is set to VIEW-Windows mode.
Set the camera server application mode to WebView Livescope mode.
Could not retrieve a description from the camera server. Make sure:
• your computer is authorized to access the camera server.
• the network address is correct.
Access restrictions have been set at the camera server.
Make sure access to the camera server is authorized and that the network address
has been correctly entered.
Could not retrieve a description from the camera server.
A camera registration error other than errors [1] - [6]. A malfunction may have
occurred on the network.
Consult the network administrator.
Administrator ID or password is invalid.
Authentication failed due to invalid administrator ID or password.
Enter the correct administrator ID or password.
Failed to retrieve the description of ***. Properties will be displayed offline.
(*** = camera server name)
Camera server description could not be retrieved, because connection to
the network was cut or power to the camera server was off.
• Reconnect to the network.
• Turn on power to the camera server.