Table of Contents
Advertisement
(10) If the saved administrator ID or password is invalid
Message
Administrator authentication for ***s failed. Click Administrator Account in Network
tab, then re-enter the correct administrator ID and the password.
(*** = camera server name)
Cause
Administrator authentication while connecting to the camera server failed when
the properties were being opened.
Action to
Click the Administration Account button in the Network tab and re-enter the correct
be taken
administrator ID and password.
(11) When camera information cannot be retrieved due to power cut, etc.
Message
Camera information could not be retrieved. Preset-setting is now unavailable.
Camera information could not be retrieved, because power to the camera was
Cause
turned off or other reason.
Action to
Turn on power to the camera.
be taken
(12) When camera information cannot be retrieved due to power cut, etc.
Message
Camera information could not be retrieved. Auto Preset Tour setting is now unavailable.
Cause
Camera information could not be retrieved, because power to the camera was
turned off or other reason.
Action to
Turn on power to the camera.
be taken
(13) Failed to write onto export target
Message
Failed to export MV data.
When the data was exported, the disk was write-protected or full.
Cause
Action to
• Release write protection on the disk.
be taken
• Secure sufficient space on the disk.
(14) Background image failed to load
Message
Cannot read this file. Its format is not supported.
The specified background image is in a format other than BMP or JPG.
Cause
Action to
Specify a BMP or JPG file for the background image.
be taken
Error Messages
115
Advertisement
Table of Contents
