Table of Contents
Advertisement
3
The switching interval can be varied freely by changing the numerical value in the Interval box.
Settings can be made in one-second intervals between 10 and 180 seconds.
When the setting is completed, click the Export button on the Toolbar to export the MV Data
and reload it in MV station.
c
Note
Starting/Stopping Auto Switch
72
The preset settings need to be made before using the Auto Switch function.
Note that the preset used in Auto Switch is specified on MV Manager and that
it is different from the preset on the camera server side (see p. 100).
When switching to assigned camera display,
cameras can be moved to previously
registered preset positions. Select by clicking
camera names in the "Assignment to
viewers" field and select the names of the
presets you wish to display from the Preset
box.
Assign a name to the assigned video pattern.
Enter the name in the "Video pattern name"
box and click OK.
If you are switching a sequence of multiple
video patterns, repeat the above procedures.
Select by clicking video pattern names
shown in the "Order of Auto Switch" field and
use the Up and Down buttons to switch the
sequence of operations. Tour starts from the
top.
Starting up Auto Switch
To operate Auto Switch, click the Auto
Switch button on the Toolbar.
Stopping Auto Switch
If you wish to stop Auto Switch, click the
Auto Switch button on the Toolbar again.
Advertisement
Table of Contents
