Motion Detection
Notification of Motion Detection
If the VB150 is being used, actions such as the following can be specified to notify you on a screen
being monitored by MV Station that motion has detected.
Motion Detection Setting Tool Screen
Notification of motion detection in the Camera 1 image
Notification of motion detection in the Camera 1 image
80
VB150
Use the Motion Detection
Setting Tool provided with
the VB150 to set the motion
detection function of the
VB150 and specify on the MV
Station to receive motion de-
tection events.
Title flashes
Camera 1 image is
being displayed
Camera 1 image is
not being displayed
Camera 1 image is
allocated and the
title flashes
The settings are made in Camera
Server Properties of MV Manager
(see p.102).
• When motion detection event
from the camera server has
been notified while image is
being displayed, the title of the
viewer can be caused to flash
w h e n t h e c o r r e s p o n d i n g
c a m e r a i m a g e i s b e i n g
displayed.
• W h e n t h e c o r r e s p o n d i n g
camera image is not being
displayed, the viewer can
a u t o m a t i c a l l y d i s p l a y t h e
camera image and the viewer
title can be flashed.
• When motion detection event
from the camera server that is
not displaying image has been
notified, the corresponding
camera image can be allocated
and displayed.