Connecting To The Camera Server; Connecting To The Camera Server By Entering Address Directly; Connecting To The Camera Server Already Registered - Canon WebView Livescope User Manual

4. Connecting to the Camera Server

Connection to the camera server can be established in two major methods as follows.

4-1. Connecting to the Camera Server by Entering Address Directly

Enter IP address or host name in the address box ( P. 5) directly and tap the Enter key.
The video port ( P. 10) can also be specified with ":" (a colon) separator; however, there
is no need to specify it.
Tip

4-2. Connecting to the Camera Server Already Registered

Open the address box ( P. 5) to display a drop-down list and select the camera site name.
For details about registering camera servers, refer to "5-3-1. Camera Site List" ( P. 9).
Once connection to the camera server is established, the server is automatically registered in
(
the camera site list P. 9) of the viewer.
To specify the video port:
4