Searching/Registering Camera Servers; Step 1: Start Up The Serch/Register Camera Server Wizard; Step 2: Search For And Register The Camera Server - Canon WebView LivescopeMV User Manual

Searching/Registering Camera Servers

Camera servers are searched and registered in the following 3 steps:
Step 1
Start up the
Search for and
Serch/Register
register the
Camera Server
camera server
Wizard

Step 1: Start up the Serch/Register Camera Server Wizard

Step 2: Search for and register the camera server

1
2
Step 2 Step 3
Complete the
settings
Click Search/Register Camera Server on the
Toolbar. When the wizard startup screen appears,
click Next.
Camera servers connected to the network are
automatically searched.
* If HTTP port other than 80 is used, the Search/
From the list of detected camera servers, select the
one you want to register by clicking on it, then click
the Register button. Enter the Administrator ID and
Password in the window that appears, then click OK.
Camera Server Registration Wizards
Register Camera Server feature will only be
available with the VB150. For other camera
servers, please use the Register Camera Server
registration procedure described on page 22.
2
25