Using Multiple Mv Stations When The Work Folder Is Not Held On The Mv Manager Machine; Setting Up The Computer; Installing The Camera Server - Canon WebView LivescopeMV User Manual

Using multiple MV stations when the work folder is not held on the
MV Manager machine
VB101/VB100
Video reception and camera
control signal transmission
M o n i t o r i n g
When you want to access the work folder from an environment where you cannot share the
work folder (from a separate LAN), the work folder can be made accessible by placing it on a
web server or file server and making it publicly available. In this scenario, the folder sharing
settings must be specified on the machine that will host the work folder before you begin
installing the software. Select any folder, specify "Sharing" for that folder and specify "Full
access" as the access type. (See "Caution" on P.14.)

Setting up the Computer

• Set the screen resolution to XGA (1024 x 768).
• Internet Explorer 5 or 5.01 is required. Use the "Full" or "Standard"
installation.
• Nominate Internet Explorer as the default browser.

Installing the Camera Server

Check that the Camera Server VB101 (or VB100) is installed correctly and that the default settings
(network settings) are selected. Then connect the server to the network. The detail settings and
display testing can be performed from the MV Manager. For information on installing and setting
up the camera servers, refer to the manuals supplied with the camera servers.
Camera server settings
and modifications
W W W s e r v e r
o r f i l e s e r v e r
W o r k f o l d e r
Reference to camera server information and
monitoring screen settings
MV Station
M o n i t o r i n g s c r e e n c r e a t i o n
a n d r e m o t e m a i n t e n a n c e
MV Manager
Camera server information and
monitoring screen settings saved
File sharing
Display properties
1
11