Table of Contents
Advertisement
Video Relay
c
Video Relay cannot be used with the VB-C10/VB-C10R and the VB150 with
the Video Input set to Multiple.
Note
Some of the features of the Video Relay may be unavailable if the motion
detection is enabled on the VB150 (see p. 105).
Viewer 1
(Camera 1)
Viewer 3
(Camera 3)
Video display sequentially switched
Setting Video Relay Intervals
1
2
Automatic Operation Functions of MV Station
Video Relay is used for sequentially
switching the video displays from several
cameras connected to one camera server.
For viewer display, since only one of several
Viewer 2
viewers can be displayed in video, automatic
(Camera 2)
sequential switching saves the monitoring
work involved in switching the video displays
by clicking the viewers one by one.
Viewer 4
(Camera 4)
Video Relay lets you freely set intervals for
switching video displays.
Select Properties from File in MV Station.
Alter the number in Interval under Video
Relay on the General tab in the window that
is displayed. You can set an interval between
5 and 30 seconds in increments of one
second.
After you have made the setting, click OK or
Apply.
7
73
Advertisement
Table of Contents
