Olivetti Fax_Lab 710 Instructions Manual page 53

6. Press the keys
until the display shows:
7. Press the key:
The display shows:
8. To view the other available values, "SILENCE LAPSE
- 3 SECS", "SILENCE LAPSE - 4 SECS", "SILENCE
LAPSE - 8 SECS", "SILENCE LAPSE - 10 SECS" or
"SILENCE LAPSE - NO", press the keys:
If you select "SILENCE LAPSE - NO", the fax machine
will not interrupt the recording in any case.
9. To confirm your choice, press the key:
10. To return the fax machine to its initial stand-by mode,
press the key:
11. If you want to move back one function, press the key:
N o t e
If you connect an external telephone answering device,
make sure that the silence lapse on the fax machine is less
than the one set on the answering device.
T
O CHANGE THE REMOTE CONTROL CODE
If the fax machine is connected to an extension that
operates in tone dialling mode and is set up for manual
reception, whenever there is a call from a corre-
spondent wishing to send you a document, you can set
it to receive the document by typing the code * * on the
extension. This operation has the same effect as press-
ing the key on the fax machine.
You can replace the second "asterisk" of this code us-
ing digits from 0 to 9.
1. Press the key:
The display shows:
2. Press the keys
until the display shows:
3. Press the key:
The display shows:
4. Press the keys
until the display shows:
5. Press the key:
The display shows:
6. Press the keys
until the display shows:
7. Press the key:
The display shows:
8. Press the key:
The display shows the code you set previously, for
example:
9. To type the new code, press the keys:
-
10. To confirm the new code, press the key:
11. To return the fax machine to its initial stand-by mode,
press the key:
12. If you want to move back one function, press the key:
N O T E
If you want to disable this function, after step 7, press the
keys to display "REMOTE CONTROL - NO", then press the
key to confirm and the
chine to its initial stand-by mode.
key to return the fax ma-
5 1