Olivetti Fax_Lab 710 Instructions Manual page 51

T
O CHANGE THE RING VOLUME
1. Press the key:
The display shows:
2. Press the key:
The display shows:
3. Press the keys
until the display shows:
4. Press the key:
The display shows the preset volume level, for exam-
ple 4:
5. To turn the volume up/down, press the keys:
6. To confirm your choice, press the key:
7. To return the fax machine to its initial stand-by mode,
press the key:
8. If you want to move back one function, press the key:
T /
O ENABLE DISABLE RECOGNITION OF THE RING
FREQUENCY
In some countries, local telephone companies offer the
possibility of assigning the same telephone line two
or more numbers, corresponding to different users.
When an incoming call is received, a different ring
frequency will indicate which user is to answer the
call.
This function is extremely useful at home or in small
offices, where the same telephone line is shared by
more than one person.
Your fax machine is capable of "learning" one of
these frequencies (see the procedure that follows).
In this way, when a call with the specific ring frequency
is received, the fax machine (in "PHONE/FAX" and
"TAD/FAX" reception modes) prepares exclusively to
receive a document.
This function is particularly useful when associated
with silent reception in that the fax machine will only
ring if the call is coming from a telephone.
We recommend you disconnect the TAD, if connected,
from the power supply before carrying out the recogni-
tion procedure.
1. Press the key:
The display shows:
2. Press the keys
until the display shows:
3. Press the key:
The display shows:
4. Press the keys
until the display shows:
5. Press the key:
The display shows:
6. To view the other available option, "DISTINCT. RING -
SET PATTERN", press the keys:
7. To confirm the setting, press the key:
The display shows:
8. Call the fax machine with the desired frequency so that
the fax machine detects it.
The display shows:
At this point you can enable the new ring frequency.
9. To enable the new ring frequency, return to the point at
which the display shows:
10. Press the key:
The display shows:
11. To view the other available option, "SET OPTION -
YES", press the keys:
4 9