Error Codes - Olivetti Fax_Lab 710 Instructions Manual

E
RROR CODES
The error codes printed both on the transmission report and
the activity report consist of two digits indicating the cause
of the error. To save space, the two-digit code without any
message is printed on the activity report.
CODE MESSAGE
OK OK
02 IMPOSSIBLE CONNECTION
CHECK WITH OTHER PARTY
03 RECEIVER DOES NOT ANSWER
04 ERR. WHILE TRANSMITTING
RESEND FROM PAGE:
05 ERR. WHILE TRANSMITTING
RESEND PAGES:
06 LINE BUSY
07 DOCUMENT TOO LONG
01 and 08 CHECK THE DOCUMENT
09 STOP PRESSED
10 ERRORS WHILE RECEIVING
CHECK WITH OTHER PARTY
11 IMPOSSIBLE RECEPTION
MEMORY FULL
OK OK?
13 ERRORS WHILE POLLING
CHECK WITH OTHER PARTY
6 0
CAUSE OF ERROR
Operation performed successfully.
The fax machine does not detect any
dialling tone or receives an irregular signal.
The correspondent is not answering or is a
fax machine.
An error occurred during transmission.
The correspondent's fax machine found
errors during reception.
The line is busy.
The document to be sent is too long. The
time taken to send it exceeds the allowed
limits.
The optical reader cannot read the
document.
You aborted transmission.
An error occurred during reception.
During reception, a printing error occurred.
Reception continued in the memory but the
space left in the memory was filled before
reception was completed.
The document was received but the printing
quality is unsatisfactory.
The correspondent has not left any
document in the ADF and has not set up
his machine for polling transmission.
WHAT TO DO
No action.
Check that the fax machine is correctly
connected to the telephone line and that the
handset is not off the hook. Then try
connecting again.
Check that the correspondent's number is
correct.
Resume transmission from the page indicated
in the report.
Resume transmission of the pages indicated in
the report.
Retry when the line is free.
Split up the document to be sent.
Remove the document from the ADF and
reinsert it. Then try connecting again.
No action.
Call the correspondent and ask him to send
you the document again.
Correct the fault and wait for the document in
the memory to be printed.
Call the correspondent.
Call back the correspondent.