To Clean The Optical Reader; To Clean The Casing; To Remove Jammed Documents; To Remove Jammed Sheets Of Paper - Olivetti Fax_Lab 710 Instructions Manual

5
6. Replace the print cartridge in its seat. Ensure that the electrical
contacts face downwards.
7. Push the print cartridge until it clicks into place.
8. Close the print cartridge compartment cover and the console.
T
O CLEAN THE OPTICAL READER
Dust accumulating on the glass surface of the optical reader
may cause problems in the scanning of documents. To avoid
these problems, the glass should be cleaned every now and
again as follows:
With the fax machine disconnected from the power socket:
1
3. Close the operator console.
N O T E
To check whether the optical reader is clean, make a copy of
a blank sheet. If any vertical lines appear on the copy and the
optical reader looks perfectly clean, contact qualified technical
staff.
6 6
4. Clean the electrical contacts us-
ing a slightly damp cloth.
Warning!
Do not touch the nozzles!
5. Clean the electrical contacts of
the print cartridge carriage with a
slightly damp cloth.
1. Flip open the console.
2. Clean the glass surface of the op-
tical reader with a cloth damp-
ened with a product designed
specifically for cleaning glass and
then dry it thoroughly.
Warning!
Do not pour or spray the clean-
ing product directly onto the
glass surface.
T
O CLEAN THE CASING
1. Unplug the fax machine from the power outlet and the
telephone socket.
2. Use exclusively a soft, lint-free cloth dampened with a neutral
detergent diluted with water.
T
O REMOVE JAMMED DOCUMENTS
During transmission or copying, a document could get
jammed (this condition is signalled by the display showing the
message: "REMOVE DOCUMENT, PRESS <
Try to unload the document by pressing the
document is not unloaded, remove it manually as follows:
1
N O T E
Never use pointed objected to remove jammed documents.
T
O REMOVE JAMMED SHEETS OF PAPER
If the paper used to print received documents or to copy docu-
ments gets jammed (this error is signalled on the display by
the message "PAPER ERROR, PRESS <
the sheet by pressing the
loaded, remove it manually as follows:
If the paper gets jammed in the ASF:
1
I
>").
key. If the
1. Open the console, remove the
document from the ADF and close
the console again.
I
>"), try to unload
key. If the sheet is not un-
1. Open the ASF panel.
2. Remove the jammed sheet. En-
sure that it does not tear.