Making Copies - Olivetti Fax_Lab 710 Instructions Manual

M
AKING COPIES
W
HAT DOCUMENTS CAN BE COPIED
As for transmission, copying requires the document to be
inserted in the automatic document feeder (ADF). Be-
fore making a copy, make sure that the document is correctly
inserted in the feeder and that it respects the characteristics
described previously (see the "Transmission" section).
Bear in mind however that for the copying function you
can only insert one sheet at a time in the automatic
document feeder (ADF).
T
O MAKE A COPY
As mentioned previously, you can also use the fax ma-
chine as a photocopier. The printing quality obtained
depends on the type of copy you want to obtain "Nor-
mal copy" or "Quality copy" and the contrast and
resolution values that you select before starting the
copying function.
1. Choose the type of contrast on the basis of the follow-
ing criteria:
• NORMAL, if the document is neither very light nor
very dark.
• LIGHT, if the document is very dark.
• DARK, if the document is very light.
2. Choose the type of resolution on the basis of the fol-
lowing criteria:
• TEXT, if the document contains easily legible text or
simple graphics.
• PHOTO, if the document contains shaded areas.
3. Insert the document in the ADF.
The display shows on the top line:
and on the bottom line, the default contrast value: "NOR-
MAL".
4. Press the key:
The display shows the default copy size, contrast and
resolution settings: 100%, NORMAL and TEXT, re-
spectively. It also shows the number of copies set (1).
5. If you want to confirm these values, press the key:
Otherwise skip to step 6.
6. Press the key:
The display shows:
7. To view the other available option, "QUALITY - NOR-
MAL", press the keys:
8. To confirm your choice, press the key:
The display shows:
9. To choose the desired copy size setting, "200%",
"140%", "70%" or "50%", press the keys:
10. To confirm your choice, press the key:
The display shows:
11. To display the other two types of contrast available,
"CONTRAST - LIGHT" or "CONTRAST - DARK",
press the keys:
12. To confirm your choice, press the key:
The display shows the values that you have just se-
lected. At this point, simply choose the resolution you
want and set the number of copies you want to make:
13. To choose the desired resolution setting, "TEXT" or
"PHOTO", press the key:
14. If you want to make more than one copy (max. 9), enter
the desired number by pressing the keys:
-
15. If you only want to make one copy, skip to the next step.
16. To make the copy, press the key:
The fax machine starts to save the document. Having
done this, the fax machine starts copying.
If you want to abort the copy in progress, press the
The fax machine will stop copying, unload the document from
the ADF and return to its initial stand-by mode, displaying the
message "COPY INTERRUPTED". Press the
clear the message from the display.
key.
key to
21