Olivetti Fax_Lab 710 Instructions Manual page 50

2. Press the keys
until the display shows:
3. Press the key:
The display shows:
4. Press the keys
until the display shows:
5. Press the key:
The display shows:
6. Press the keys
until the display shows:
7. Press the key:
The display shows:
8. To view the other available option, "CALLER ID - NO",
press the keys:
9. To confirm your choice, press the key:
10. To return the fax machine to its initial stand-by mode,
press the key:
11. If you want to move back one function, press the key:
N O T E
With this function enabled, the date and time will be brought
up to date whenever a call is received.
4 8
T
O CHANGE THE NUMBER OF RINGS
This function is only enabled in some countries.
If set in "AUTOMATIC", "PHONE/FAX" or "TAD/FAX"
reception mode, the fax machine automatically answers
calls after a certain number of rings.
If you want, you can change the number of rings, as
follows:
1. Press the key:
The display shows:
2. Press the key:
The display shows:
3. Press the keys
until the display shows:
4. Press the key:
The display shows:
5. To view the other available values, "RINGS NUMBER
- 1", "RINGS NUMBER - 3", "RINGS NUMBER - 4",
"RINGS NUMBER - 5", "RINGS NUMBER - 6", "RINGS
NUMBER - 7" and "RINGS NUMBER - 8", press the
keys:
6. To confirm your choice, press the key:
7. To return the fax machine to its initial stand-by mode,
press the key:
8. If you want to move back one function, press the key:
N o t e
If you connect an external telephone answering device,
make sure that the number of rings after which the answering
device is activated is less than the one set on the fax machine.