Olivetti Fax_Lab 710 Instructions Manual page 13

6. To confirm the setting, press the key:
The fax machine automatically returns to its initial stand-
by mode.
Stand-by mode is the status in which the fax machine is idle
and is the mode in which the machine can be programmed.
Stand-by mode will be shown on the display as follows:
• Without the original document inserted in the ADF.
For the model with a built-in TAD:
10-Sep-07 12:25
For the base model:
10-Sep-07 12:25
• With the original document inserted in the ADF.
T
O CHANGE THE DATE AND TIME
If the date and time shown on the display are not cor-
rect, you can change them at any time.
Bear in mind that if you have the caller ID function ena-
bled, the date and time will be automatically brought up
to date whenever you receive a call.
1. Press the key:
The display shows:
2. Press the keys
until the display shows:
3. Press the key:
The display shows:
4. Press the key:
The display shows:
5. At this point, you can choose between the following
options:
"SET DATE/TIME" - To modify the date and time set
previously.
"DATE FORMAT" - To choose the date format that will
be shown on the display.
"HOUR FORMAT" - To choose the time format that will
be shown on the display.
6. Press the key:
The display shows:
"XX-XX-XX XX:XX" indicate the current date and time.
7. To display one of the options listed above, press the
keys:
8. To confirm the setting, press the key:
9. If you have made a mistake or wish to abort the proce-
dure in progress, press the key:
If you have chosen the "SET DATE/TIME" option, proceed as
follows:
1. Enter the new date and time (e.g. 13-09-07; 18:00), by press-
ing the keys: - . As each digit is entered, the cursor will
move to the next one.
2. If you wish to move the cursor to digits to be modified, press
| }
the keys: / .
3. Then overwrite the digits with the correct ones, by pressing
the keys: - .
4. To confirm the setting, press the key:
5. To return the fax machine to its initial stand-by mode, press
the key: .
6. If you want to move back one function, press the key:
If you have chosen the "DATE FORMAT" option, proceed as
follows:
1. The display shows: "DATE FORMAT" and "DD/MM/YY".
2. If you want to select a different format from the one displayed,
press the keys: .
3. To confirm the setting, press the key:
4. To return the fax machine to its initial stand-by mode, press
the key: .
5. If you want to move back one function, press the key:
If you have chosen the "HOUR FORMAT" option, proceed as
follows:
1. The display shows: "HOUR FORMAT" and "24 HOURS".
2. If you want to select a different format from the one displayed,
press the keys: .
3. To confirm the setting, press the key:
4. To return the fax machine to its initial stand-by mode, press
the key: .
5. If you want to move back one function, press the key:
.
.
.
.
.
.
11