Roll Dup; Latch Out - Brother HL-4000CN Service Manual

2.2.9

Roll DUP

1) Release the hook remove the gear 30 from the shaft of the roll DUP.
2) Extract the bush earth securing the left end of the shaft to the chute ASSY out.
3) Remove the E-ring securing the right end of the shaft to the chute ASSY out.
4) Extract the bush securing the right end of the shaft to the chute ASSY out.
5) Remove the roll DUP.
2.2.10

Latch out

1) Remove the spring latch out from the chute ASSY out.
2) Release the 2 hooks securing the holder latch to the chute ASSY out.
3) Slide the holder latch to the right to remove it from the chute ASSY out together with
the latch out.
4) Remove the latch out from the holder.
Spring latch out
Roll DUP
Bush
Fig.4-34
Holder latch
Fig.4-35
IV-22
Chute ASSY out
Bush earth
Gear 30
Latch out