2.2
Front of the Printer
2.2.1
Chute ASSY out
Note:
In the following step, lock the chute ASSY out and front ASSY in to the printer with
latches A and B.
1) Remove 5 connectors (A-E) from left hand side of printer that connect to the chute
ASSY out.
2) Remove 2 lower connectors (F, G) and 1 earth connector from left hand side of
printer that connect to the chute ASSY out.
3) Remove 3 connectors (H-J) and 1 earth connector from the right hand side of the
printer that connect to the chute ASSY out.
4) Carefully remove the cables from the cable quickly taking note of the cable routing.
5) Retake the paper feed roller to raise plate ASSY bottom MSI.
"A"
"B"
"C"
"D"
"E"
Chute ASSY out
"I"
Earth connector
"G"
"F"
PWBA HNB DRV
Screw, M3x10
"J"
Fig.4-23
IV-16
Earth connector
Screw, M3x10
"H"
Chute ASSY out
Left side view
Right side view