Lever Drum: R - Brother HL-4000CN Service Manual

2.4.7

Lever drum: R

1) Remove 4 screws securing the plate ASSY lever R from the right side of the printer.
2) Remove the plate ASSY lever R from the printer.
3) Release the hook of the spring lever 30N hitched over the convex portion of the 4
lever drum: R from the right side of the printer.
Spring lever 30N
4) Remove the link lever: R from the printer together with the spring lever 30N.
5) Remove the lever drum: R from the printer.
Gear IDL. press
Gear press R
Spring lever 30N
Fig.4-87
Lever drum: R
Fig.4-88
IV-52
Screw, M3x10
Plate ASSY lever R
Screw, M3x10
Link lever: R