Profile Specification - Brother HL-4000CN Service Manual

2) All display
Mode
For
transparency
ICM
readjusted
(Colorsync for
Macintosh)
Toner save
Presentation
Standard
(High gloss)
High quality
(High gloss)
Paper type
Plain paper 1/
Plain paper 2
Other paper
8.9

Profile Specification

The user can select "Color Temperature/Gamma Specification," "ICC Profile
Specification," or "No Specification" as a color conversion profile.
Resolution Use and processing
600dpi
This mode is suitable for printing OHP transparencies.
The screen and color conversion for a small number of
lines reduce IOT defects and make this mode suitable for
printing on transparencies.
600dpi This mode is suitable for color matching with the display
using ICM.
600dpi The toner save function is used in this mode.
The hue generally goes down but the toner consumption
is reduced.
600dpi This mode is suitable for printing presentation materials
by clear color reproduction. In this coherency mode, the
output hue is the same as those of other models.
600dpi Glossy prints are output in this standard mode.
(Plain paper 1/Plain paper 2)
600dpi Glossy prints are output in this high quality mode.
(Plain paper 1/Plain paper 2)
Image quality mode
Standard (High gloss)/
High quality (High gloss)
High definition
Other modes
(Standard, High quality, etc)
High definition
Other modes
(Standard, High quality, etc)
I-13
Engine resolution/Speed
600dpi
Simplex Duplex Simplex
Half Half
speed speed
Half
speed
Full Full
speed speed
Half
speed
Half
speed
1200dpi
Duplex
Half
speed