Sensor Photo: Low Paper; Solenoid Feed - Brother HL-4000CN Service Manual

2.5.8

Sensor photo: Low paper

1) Release the hooks at 3 positions securing the sensor photo: low paper to the pickup
ASSY.
2) Remove the connector on the sensor photo: low paper.
3) Remove the sensor photo: low paper from the pickup ASSY.
2.5.9

Solenoid feed

1) Remove 1 screw securing the solenoid feed from the pickup ASSY.
2) Separate the solenoid feed a little from the pickup ASSY and shift the harness of the
solenoid feed.
3) Remove the connector of the solenoid feed from the pickup ASSY.
Right
Sensor photo: low paper
Fig.4-106
Solenoid feed
Fig.4-107
IV-64
Right view
Rear